PRODUCTS

Vertiv ( Liebert) EXM 180 kW UPS System

Application Indoor
Manufacturer Vertiv
Equipment Type UPS System
Model Family EXM
Model # 47SA180SAC001RJ
Rating 180 kVA
Input voltage 208V
Output voltage 208V
Phase 3 ph
Frequency 60 Hz
Year2019

Call us at 877-885-9208 or fill out the form below.

    Liebert EXM Single Module UPS System each consisting of the following: 180kVA

    Nameplate Liebert EXM UPS, model 47SA180SAC001RJ, with the following features:

    • System Input Voltage of 208/120V, 3 Phase, 4 wire plus ground
    • System Output Voltage of 208/120V, 3 Phase, 4 wire plus ground
    • Fixed Capacity 180kVA UPS System
    • 208V Native Output Voltage
    • Single Input Configuration
    • One (1) IntelliSlot Unity Dual Protocol Card; P/N: IS-UNITY-DP; Monitoring and

    configuration of Vertiv products and environmental sensors through stand-alone Web UI

    or integration with Trellis™, Liebert Nform, LIFE™ Services. Supports third-party

    management systems using SNMP, Modbus or BACnet.

    • Transformer-Free Architecture – Efficiency up to 95% in double conversion mode
    • Unity Power Factor Rating – Delivers more usable power per kVA
    • Load Power Factor Support – Supports loads 0.5 lagging to unity without derating
    • Energy Optimization Mode (Eco-Mode)
    • 65kAIC Rating – Provides interrupting rating and labeling of 65kA
    • Active Power Factor Corrected IGBT Input Converter
    • PWM transistorized (IGBT) inverter
    • Continuous Duty Static Bypass Switch
    • Input Contacts – Dry contacts are available for functions including monitoring external

    breakers, on-generator signal, and other functions

    • Output Contacts – Dry contacts are available for functions including a permissive signal

    to maintenance bypass SKRU, to trip external breakers, and other functions

    • Generator Load Control – Suppresses battery charging reducing power demand by an

    external signal. Shifts unit from Eco Mode to double conversion (if applicable), and

    synchronizes the inverter output with the bypass

    • Automatic retransfer – Provides return to inverter power after an overload
    • DSP based controls – Provides digital control of power conversion and system operation
    • Backlit LCD display – Monitors power conversion, UPS operation and utility conditions.

    Deviations are logged for troubleshooting

    • Temperature-Compensated Charging/Battery Load Test
    • Top-and-bottom-entry cable access
    • Front only service access
    • Local Emergency Power Off (EPO)
    • LIFE™ Services for the 1st year
    • IP 20 enclosure
    • Casters and leveling feet
    • UL and cUL Listed to UL Standard 1778 4th Edition

    Vertive Battery solution consisting of the following :

    • 6 min @ 180 kVA, (2) -880 MM External Cabinet(s) of ENERSYS HX400-FR Batteries

    per UPS module

    • 6 min: Run Time at Ordered KVA
    • BP-No Battery Monitoring
    • Cabinet Mounted Left Attached to Module

    The solution includes  Maintenance Bypass Cabinet, model 47MBS38CC0R1074

    with the following features:

    • 3 Switching Devices (BIB,MBB,MIB)
    • 800 Amp Breaker Trip Rating
    • Key Interlock (SKRU)
    • Cabinet Mounted Right Attached to Module with connecting cables factory supplied
    • 800 MM – 31.5 inches Frame Size
    • Front Access service design
    Rating180 kVA
    Input Voltage 208V
    Output Voltage 208V
    Phase3 ph
    Frequency60 Hz

    Liebert EXM Single Module UPS System each consisting of the following: 180kVA

    Nameplate Liebert EXM UPS, model 47SA180SAC001RJ, with the following features:

    • System Input Voltage of 208/120V, 3 Phase, 4 wire plus ground
    • System Output Voltage of 208/120V, 3 Phase, 4 wire plus ground
    • Fixed Capacity 180kVA UPS System
    • 208V Native Output Voltage
    • Single Input Configuration
    • One (1) IntelliSlot Unity Dual Protocol Card; P/N: IS-UNITY-DP; Monitoring and

    configuration of Vertiv products and environmental sensors through stand-alone Web UI

    or integration with Trellis™, Liebert Nform, LIFE™ Services. Supports third-party

    management systems using SNMP, Modbus or BACnet.

    • Transformer-Free Architecture – Efficiency up to 95% in double conversion mode
    • Unity Power Factor Rating – Delivers more usable power per kVA
    • Load Power Factor Support – Supports loads 0.5 lagging to unity without derating
    • Energy Optimization Mode (Eco-Mode)
    • 65kAIC Rating – Provides interrupting rating and labeling of 65kA
    • Active Power Factor Corrected IGBT Input Converter
    • PWM transistorized (IGBT) inverter
    • Continuous Duty Static Bypass Switch
    • Input Contacts – Dry contacts are available for functions including monitoring external

    breakers, on-generator signal, and other functions

    • Output Contacts – Dry contacts are available for functions including a permissive signal

    to maintenance bypass SKRU, to trip external breakers, and other functions

    • Generator Load Control – Suppresses battery charging reducing power demand by an

    external signal. Shifts unit from Eco Mode to double conversion (if applicable), and

    synchronizes the inverter output with the bypass

    • Automatic retransfer – Provides return to inverter power after an overload
    • DSP based controls – Provides digital control of power conversion and system operation
    • Backlit LCD display – Monitors power conversion, UPS operation and utility conditions.

    Deviations are logged for troubleshooting

    • Temperature-Compensated Charging/Battery Load Test
    • Top-and-bottom-entry cable access
    • Front only service access
    • Local Emergency Power Off (EPO)
    • LIFE™ Services for the 1st year
    • IP 20 enclosure
    • Casters and leveling feet
    • UL and cUL Listed to UL Standard 1778 4th Edition

    Vertive Battery solution consisting of the following :

    • 6 min @ 180 kVA, (2) -880 MM External Cabinet(s) of ENERSYS HX400-FR Batteries

    per UPS module

    • 6 min: Run Time at Ordered KVA
    • BP-No Battery Monitoring
    • Cabinet MLiebert EXM Single Module UPS System each consisting of the following: 180kVANameplate Liebert EXM UPS, model 47SA180SAC001RJ, with the following features:
      • System Input Voltage of 208/120V, 3 Phase, 4 wire plus ground
      • System Output Voltage of 208/120V, 3 Phase, 4 wire plus ground
      • Fixed Capacity 180kVA UPS System
      • 208V Native Output Voltage
      • Single Input Configuration
      • One (1) IntelliSlot Unity Dual Protocol Card; P/N: IS-UNITY-DP; Monitoring and

      configuration of Vertiv products and environmental sensors through stand-alone Web UI

      or integration with Trellis™, Liebert Nform, LIFE™ Services. Supports third-party

      management systems using SNMP, Modbus or BACnet.

      • Transformer-Free Architecture – Efficiency up to 95% in double conversion mode
      • Unity Power Factor Rating – Delivers more usable power per kVA
      • Load Power Factor Support – Supports loads 0.5 lagging to unity without derating
      • Energy Optimization Mode (Eco-Mode)
      • 65kAIC Rating – Provides interrupting rating and labeling of 65kA
      • Active Power Factor Corrected IGBT Input Converter
      • PWM transistorized (IGBT) inverter
      • Continuous Duty Static Bypass Switch
      • Input Contacts – Dry contacts are available for functions including monitoring external

      breakers, on-generator signal, and other functions

      • Output Contacts – Dry contacts are available for functions including a permissive signal

      to maintenance bypass SKRU, to trip external breakers, and other functions

      • Generator Load Control – Suppresses battery charging reducing power demand by an

      external signal. Shifts unit from Eco Mode to double conversion (if applicable), and

      synchronizes the inverter output with the bypass

      • Automatic retransfer – Provides return to inverter power after an overload
      • DSP based controls – Provides digital control of power conversion and system operation
      • Backlit LCD display – Monitors power conversion, UPS operation and utility conditions.

      Deviations are logged for troubleshooting

      • Temperature-Compensated Charging/Battery Load Test
      • Top-and-bottom-entry cable access
      • Front only service access
      • Local Emergency Power Off (EPO)
      • LIFE™ Services for the 1st year
      • IP 20 enclosure
      • Casters and leveling feet
      • UL and cUL Listed to UL Standard 1778 4th Edition

      Vertive Battery solution consisting of the following :

      • 6 min @ 180 kVA, (2) -880 MM External Cabinet(s) of ENERSYS HX400-FR Batteries

      per UPS module

      • 6 min: Run Time at Ordered KVA
      • BP-No Battery Monitoring
      • Cabinet Mounted Left Attached to Module

      The solution includes  Maintenance Bypass Cabinet, model 47MBS38CC0R1074

      with the following features:

      • 3 Switching Devices (BIB,MBB,MIB)
      • 800 Amp Breaker Trip Rating
      • Key Interlock (SKRU)
      • Cabinet Mounted Right Attached to Module with connecting cables factory supplied
      • 800 MM – 31.5 inches Frame Size
      • Front Access service design

      ounted Left Attached to Module

    The solution includes  Maintenance Bypass Cabinet, model 47MBS38CC0R1074

    with the following features:

    • 3 Switching Devices (BIB,MBB,MIB)
    • 800 Amp Breaker Trip Rating
    • Key Interlock (SKRU)
    • Cabinet Mounted Right Attached to Module with connecting cables factory supplied
    • 800 MM – 31.5 inches Frame Size
    • Front Access service design
    Call Now ButtonCall Us Here